arcoPlus® Reverso 626

Modular system of bi-protected multiwall polycarbonate for translucent roofing applications.

arcoPlus®626 reversò is a modular system of coextruded six-wall polycarbonate panels with a thickness of 20mm.

These are fixed to the existing structure using specific anchor brackets. The panels are joined together by a protected polycarbonate cover plate assembled using a click-on system, or by an aluminium connector, for a perfectly  watertight seal.

Specifications

Production Standards

  • thickness – 20mm
  • structure- 6 walls
  • effective modular width – 600mm
  • panel length – no limit
  • colors available – see page 11 of our catalog

Plastic Glazing Specifications

Click here to view/download Plastic Glazing Specifications

Technical Features

  • Thermal insulation – 1.7 W/m2K
  • U-Value (R=1/U) – 0.30
  • Acoustic insulation – 20 dB
  • Linear thermal expansion – 0.065 mm/m°C
  • Temperature range – -40°C +120°C
  • U.V. rays protection – Coextrusion
  • Fire reaction Class A  ASTM E-84
Color Light transmission (LT) % Solar Heat Gain Coefficient (SHGC) Shading coefficient (SC)
Clear 65 68 0.78
Blue 48 53 0.61
Green 48 53 0.61
Bronze 30 50 0.57
Opal 40 45 0.52
Contact Gallina for copies of test results.
Advantages

❖ Light transmission
❖ Resistance to U.V. rays and to hail
❖ Heat insulation
❖ Bendability R.min=4m

Easy and Low-Cost Installation

To ensure compliance with snow load and negative wind load resistance requirements, anchor brackets should be fitted for each purlin.

The polycarbonate panels are fastened to the underlying structure using specific brackets, which must be anchored to the purlins using suitable self-drilling/self-tapping screws (on metal structures) and tap bolts (for wooden structures). These screws and bolts are not supplied.

Different connector profiles can be used, depending on the required load specifications.

Applications

❖ Bardages verticaux
❖ Roofing
❖ Curved roofing

Load Resistance
arcoPlus 626 Reverso (Aluminum) on 2 Supports

dyerware

arcoPlus 626 Reverso (Polycarbonate) on 2 Supports

dyerware

arcoPlus 626 Reverso (Aluminum) on 3 Supports

dyerware

arcoPlus 626 Reverso (Polycarbonate) on 3 Supports

dyerware

Curved System

Complete Roofing System

Modular multiwall polycarbonate panels for the construction of flat or curved roofing. The panels are anchored to the supporting structure using specific aluminium brackets to guarantee load strength. Depending on the load capacity values required, or the distance between the purlins of the underlying structures, either polycarbonate cover plates can be used or, for greater strength, aluminium connectors.

Accessories

The arcoPlus® system includes a complete range of accessories to facilitate installation.

The air cells of the panels must be sealed using a specific polycarbonate profile or vented aluminium breather tape.

This allows correct ventilation and prevents soiling on the inside.

Connectors

  • 4329
    Pad PE-LD
    4x15mm
  • 4316 M6 nut
    4315 M6 x 20 screw
    Accessories for connector
  • 2182
    Block cover
  • 4327
    Additional tape

Metal Profiles

  • code 4310
    Connector AL
    profile with screw
  • code 4271
    Base-side AL profile
    with frontal opening
  • code 4252
    closing support in AL

Accessories

4303 - Covergasket stopper

4303 – Covergasket stopper

2146 - Cover gasket in polycarbonate

2146 – Cover gasket in polycarbonate

2282 - Double connector in polycarbonate

2282 – Double connector in polycarbonate

2179 - Start profile in polycarbonate

2179 – Start profile in polycarbonate

2180 - End profile in polycarbonate

2180 – End profile in polycarbonate

4310 - Connector AL profile with screw

4310 – Connector AL profile with screw

4271 - Base-side AL profile with frontal opening

4271 – Base-side AL profile with frontal opening

4252 – Closing support in AL

4252 – Closing support in AL

4319/200 – AL eclipse for outlook point

4319/200 – AL eclipse for outlook point

4328 - AL Plate

4328 – AL Plate

4264 - Stainless steel plate for vertical connection

4264 – Stainless steel plate for vertical connection

4213 (dim. 40x35x580) / 4221 (dim. 70x40x580 Pad PE-LD)

4213 (dim. 40x35x580) / 4221 (dim. 70x40x580 Pad PE-LD)

CAD Drawings